Reasons and solutions for water pump burnout during use of chiller
The water pump is one of the important components in the chiller system. If the water pump burns out during use, it will affect the operation of the entire unit. So what factors cause the water pump to burn out?
Reasons and solutions for water pump burnout:
1. Water leakage occurs in the chiller. Water leakage in the chiller will cause the water pump to burn out. At this time, we should first turn off the power of the chiller, check the water leakage of the chiller, and then eliminate the problems one by one.
2. The voltage supply is unstable, and the water pump with unstable voltage may also burn out. It is recommended that customers and friends install a voltage regulator to avoid unnecessary losses.
Additional resources:How to solve the problem of oil leakage in the chiller?
3. The voltage and working frequency do not match. Before purchasing an industrial chiller, you should understand its own voltage and working frequency, and then choose a suitable air-cooled chiller.
4. The circuit board is short-circuited or burned out. If these two situations occur, we must contact the manufacturer of the chiller to solve the problem.
If you encounter any unresolved faults during actual use, we should contact the purchasing manufacturer in time to assist the after-sales personnel in solving them. Do not blindly solve any faults by yourself, otherwise the losses will be greater.